ELKOHUNTER
Very Active Member
- Messages
- 1,839
what is better for broadheads 2" Blazer or 1.5" Mini-Blazer Vanes?
Mini or Not
- Thread starter ELKOHUNTER
- Start date
COLO3D
Very Active Member
- Messages
- 1,379
If you are shooting three fletch, you would need the 2". I have a friend who shoots the 1.5" with four fletch. He really likes the way they steer broadheads. I have had good luck with the 2" but bad luck getting them to stick. The AAE Max Hunters stick very well and fly every bit as well.
2" Blazers. I have never had any issues with them coming off. But I have a friend that has them falling off all the time. Sometimes I think they use too much mold release on the plastic vanes. If you're having issues scrub the base with some acetone and a Qtip and they should stick. Make sure you use enough glue. I don't scrub mine and they stay on.
T
timberline_shedfreak24
Guest
2" for sure...
Timberline
"Live for somethin' or die for nothin'"
Timberline
"Live for somethin' or die for nothin'"
E
elk_horn
Guest
LAST EDITED ON Feb-24-08 AT 10:53AM (MST)[p]Never tried the 1.5" but I do like the 2" I will never go back to the 4"
A
azcouesandelk
Guest
The only way I have heard of the mini's working with a 3 fletch is if you were to stagger them. But I would recomend going with the 2 inch just because they are higher profile and tend to stailize quicker. Also with the 2 inch you are only picking up 2 grains for each vein.
