leaning left

[magicmuleys]

I was wondering if anybody else has had or has this problem, if you had it maybe you can share what u did to fix it. I have a Trophy Ridge Matrix sight - at twenty yards im dead on horizontal at thirty im a little to the left and as i move back it keeps drifting to the left shooting at 50 yds im still in the kill zone but my groups are to the left and not centered. its a inline sight and i was thinking my bow is not vertical when i release maybe a bad habit

 

[COLO3D]

I usually don't sight in my windage until I get to around 40 yards. I find that when the 40 is right on the 20 will still be right. Other than that, are you watching your level?

 

[AZbowhntr]

Same here. If it just a gradual thing then I would site in your windage at 40 yds and I bet when you shoot at 20 again you will still be dead on. Remember at the long yardages it doesn't take as much of a move to move your groupings.

I just had a winners choice string put on my bow and went out and paper tuned my bow. When I shot at 25 yds I was almost dead on. But my further pins where alot further off. Good luck.

 

[BigPig]

Sounds like hand torque to me. Watch your level.

 

[DarktimberMt]

You need to adjust the windage on your rest (left-right), Go to archerytalk.com and search walkback tuning.

 

[bckcntrybuck]

alot of it could be your sight. I have had several buddies that have used that sight and have had the same problem. They found that the pins were pretty weak and would slightly bent to the left or the right. make sure your pins are not bent if not make sure you are not tourquing the bow and you are following through with your shot